H-King Bixler 3 Glider 1550mm (61″) PNF Unboxing

H-King Bixler 3 Glider 1550mm (61″) PNF Unboxing


What to tell about this bird by now? Great plane for beginner pilots who wants to start to learn to fly, great platform for FPV and great bird for experience pilots who just want to go to the runway and relax. Big salute to all RC lovers all over the world from Captain Blaž & Pilot Robert Slovenia. See you soon. Oh yeah…

39 comments

  • smrkc

    Ej throw this plane away. It sux big time.

    Reply
  • Matt Shellback

    Hey Robert, since we're on the Hobbyking subject can you do this naval aviation veteran a favor and pull out that blue durafly T-28 again and try out the flaps and speed brake? Even if you have to try it on the grass.

    Reply
  • JetTech Don

    That might be a good trainer,but it is also a very good FPV airplane.You guys would have a lot of fun with that putting a camera and trying FPV flying.It is also nice to see Andrew again.Cheers gentlemen!!

    Reply
  • Steve one

    I wish these were around when I started to learn to fly another great unboxing

    Reply
  • Sia S

    Hobbykong is new supplier?

    Reply
  • Ralph Partipilo

    Great job guys ! Salute !

    Reply
  • River

    Guys put a camera on it so we can see where you fly from the air. It would be fantastic if you did that in the quarry too.

    Reply
  • Sia S

    Captain blaz should put a nitro motor on that there Sexy plane….

    Reply
  • RC Hobbyist Extreme

    I have a friend that wants to trade his Bixler for my Airboat so badly. I would come out on the short end of the stick as my air boar is Nitro and has Futaba metal servos. Its an older kit but built really well and I got a brand new engine for it because the original was from some limited build trainer and the engine was bad. The chrome was peeling off the cylinder. To resleeve it would cost me more than what the engine is even worth. My friend wants a fishing platform and it would work except he would have to have to dwitch to am electric set up. A Bixler is not that expencive anyways. If I got one, I would custom build it anyways. I would go with FPV. I do like the colors. Its about time they changed the colors. Its a nice plane thats for sure. Those wheels are a complete joke. Too small and wheel pants? Come on HK! At least change that. Personally, I think one wheel mounted on the bottom is enough for that plane. Its too big for my back yard flying experience . I myself think belly landing is the way to go on the pusher anyways.

    Reply
  • Jeremy Bressler

    I would like to see you try the convergence vtol .. I think you might like it..love watching you keep it up..

    Reply
  • Rikard Johansen

    Look a dis, Heyyy!! 🙂

    Reply
  • Mario Verkerk

    Aah cool, this plane is still my first-plane-candidate! Now I need to find someplace to fly (safely) here in the Netherlands.

    Reply
  • Jeff in Lower Alabama

    CPL Andrew safe travels, pilot Robert and CPT Blaz thank you for relief from watching Michael marching inland, Jeff in LA USA

    Reply
  • didactylos4 diddy4

    It's a very good plane but only 3rd now on my list of favourite Bixlers ( used to be 2nd )

    Reply
  • Steven Stowe

    Hey Robert, when I started to fly rc planes, I called them wheel shoes…I also got corrected..No No wheel pants…Oh OK…

    Reply
  • Dennis Lamser

    Hi Guys,
    I wonder if you found yet the note I left you when I visited your RC field on 2 October on my way from Ljubljana to Zagreb, as part of my vacation to see the two beautiful countries of Slovenia and Croatia. I left it under the picnic table at your field. Sorry I missed you there and filming another great video.
    A fan and subscriber from Boston, USA, Dennis (Zdenko) Lamser

    Reply
  • Edward&Gloriajeannelson hillbillyrc'n

    Great looking plane, ready to see maiden flight. Keep up the good work you guys. Hello to Andrew. Capt.Blaz kinda got excited and said hobby Kong. That was a golden moment. Thanks for your time and knowledge.

    Reply
  • Gary Fynmore

    What do you mean by 'hand tossing ' 🤔

    Reply
  • Michael Kensinger

    I started to Hand Tossed at a very Young age. I don't know what age,but I was scared and alone…… I think it was Rubber Band Powered…lmao!!! 🙂 Great Video Guys !! Always look forward to you Guys Videos !!

    Reply
  • George Gesualdi

    Thanks for another one guys! That plane looks like it would be a sweet trainer. The E-flite Apprentice is still the best one in my opinion.

    Reply
  • Grant Clarke

    Another fun video. Very informative.

    Reply
  • Michael Helfand

    pilot Robert, the Bixler looks good, and the laser cut plywood mount for FPV is nice also. And they even put it together for you right out of the box. Now you say wheel shoes, some say wheel pants, how about wheel shorts, since they don't completely cover the wheels! Oh Ya!!!

    Reply
  • Josh Weaver RC

    A fellow pilot that is enjoying your videos will enjoy watching this one. I helped him maiden this. We put in a 3s 2200 for flight and another just for CG. The CG is just behind the spar.

    Reply
  • David Payton

    Captain Andrew was great. 🙂

    Reply
  • Matthew Brothers

    Those are so great for fpv

    Reply
  • Criss { Lastname }

    Didn't get a notification from YouTube for this one. Glad I checked in.

    Reply
  • Rolf Tammen

    Super show,thank you very much !

    Reply
  • Andrew Terbizan

    Hi my Brothers from another mother that plane would be a great start for getting into this hobby and for making some airborn footage maybe say from the quarry OH YEAH just fantastic and high Captain Andrew from Andrew in Australia.

    Reply
  • Russ C

    Hobby Kong – LMAO As good as you guys are at speaking da English – if you ever start sounding like us I'm quitting the channel 🙂
    Salute to Andrew. Bring some Hobby Kong planes next time.

    Reply
  • scoobydoo420

    I'm sorry I'm not a hobby king fan I just tried to buy a plane from them a few weeks ago and it showed up broke and now the last week I've been fighting with the hobby kings company just to get a new plane or a new part and both have been like pulling teeth. The company does not look at thing as a customer point of view they look at things from there wallets and that's it they don't care about the customer and plus there's no phone number to call them it's all email and that takes days to get a response

    Reply
  • Tim Robson

    Yet another fantastic unboxing as always you make my day sending warm friendship from UK too Slovenia

    Reply
  • Mike and Dee Petrillo

    This plane is great to learn on.I had a sky surfer that i pluged the rudder in the aileron spot for three channel because i had no help to learn to fly, then when i flew a little i put it back to 4 channel and went from there.

    Reply
  • Peter Goodwin

    Thanks guys, ive wrecked all those glider type planes . Axn floater, Dynam hawksky . They all fly Great, too bad i dont. Thanks guys.

    Reply
  • Tims fpv

    great video guys. i know andrew is enjoying the visit

    Reply
  • João Dias de Carvalho

    Hi. Thanks for this review. I still flight my BIX3 almost all weekend and publish my videos about what a I learn with him and all can learn too. It's a great RC Airplane to learn, I say that in all my videos. The fact of BIX3 have landing gear is advantage in my opinion to learn to do great landings. And have Flaps… Be welcome and again, thanks very much for this review, best regards!

    Reply
  • Russ C

    I pushed da buttton on this one. Waiting for my box and one of the new Spektrum 6 ch receivers that has no external antenna and the bind button on top requiring no bind plug. Salute

    Reply
  • Apartma Na Krki

    Hi, Robert and Andrew, interesting video. I started to visit your chanel, cause my guests ,as Andrew, rented my apartments (http://www.na-krki.si/?lang=en ) and mentioned that they are going to visit you. Keep up the good work, you are the best!

    Reply
  • george schichtle

    nice bird

    Reply
  • Random Restoration

    You forgot a Radio Recommendation!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *