How to: Install a Single Sliding Door – Husky by P C Henderson

Versatile, quiet and robust – the Husky range is ideal for wardrobes, internal doors and room dividers. Available in two weights for doors weighing up to 50kg and 100kg. With an array of optional extras available such as soft stop, low headroom and simultaneous action kits and a range of handles, locks and tracks – there are many alternatives to choose from to make this system unique. Please refer to the fitting instructions for the detail of the routing prior

Read more

How to: Install a Sliding Door – Senator by P C Henderson

The Senator kit is ideal for entrance doors and room dividers. Designed for timber, timber framed and composite doors weighing up to 30 kilograms, this system offers an alternative method of access between two rooms. The kit Track, top hangers, screw pack, guides and stops. The tools Drill, tape measure, spirit level, 10 millimeter spanner, screwdriver (electric or manual), set square. Fitting the hangers to the door Firstly we need to attach the hardware to the door. Start by marking

Read more

Installation Tips for Sliding Glass Doors : Cleaning the Track to Install a Sliding Glass Door Lock

Hi there! I’m Daniel on behalf of Expert Village. In this particular clip, we’re going to be cleaning the track and prepping it for the installation of a sliding glass door lock. Now what’s important about cleaning the track, is we want to make sure we get all the dirt and grime out of it, because the door will actually sit a little higher, and because the lock goes into the other door, it tends to settle after a period

Read more

How to: Install a Sliding Wardrobe Door – Double Top by P C Henderson

Double top is ideal for wooden wardrobes and cupboard doors weighing up to 45 kilograms. By buying the hardware separately, you are able to choose doors to match your personal tastes and designs. The kit Track guide, stop and screws, hangers. The tools Drill, tape measure, screwdriver (electric or manual), set square. Installing the track to the lintel Measure the location of the track within the opening. Position the track and, using a pencil, mark out all the pilots hole

Read more

How to install a sliding glass door track cover

Hey, it’s Mike from swisco.com and today I’m going to show you how to install a sliding door track cover. In this exercise I’m going to show you how to install both a large and small track cover and I’ll be using the Swisco 80-102 and 80-100 track covers as an example which are both available online at swisco.com. for this exercise you will need a Philips head screwdriver a drill a 7/64″ drill bit a hammer wood block file

Read more

Richmond Sliding Gate Installation Summary

This summary will show you how to install a Richmond sliding gate. For further detailed instructional videos, please see our website or Youtube channel. Before starting, it’s important to ensure there is clearance for the gate when open. The gate track needs to be more than twice the length of the gate opening. The track is bolted in place parallel to the opening. There are two types of track wheels available. Bottom mount track wheels bolt to the bottom of

Read more

How to Replace a Sliding Glass Door Track

Today, we’re going to replace a worn down vinyl sliding door track with the SWISCO 80-106 6′ sliding glass door track. While we’ll be using the six foot track, please note. There’s also an 8 foot track available To remove the screen back off the rollers by turning the adjustment screws counterclockwise With the tension off the rollers you can [now] pry the screen door off We’re using a 90 degree angle pry Bar scraper Next remove the stationery glass

Read more

How to: Install Sliding Door Hardware – Soltaire by P C Henderson

Soltaire is a sophisticated sliding door hardware system designed to accommodate interior and exterior doors weighing up to 120, 180 or 250 kilograms. The system is extremely reliable and offers exceptional weather and corrosion resistance due to its 316 marine grade stainless steel components. Soft stop and low headroom kits are available as optional extras. Prior to installation, the door will require some routing detail to fit the flushpulls and to create the guide channel in the bottom of the

Read more

Sliding closet mirror door rollers and tracks

Hey, it’s Mike from SWISCO.com and today I’m going to show you two types of sliding mirror door rollers. Concave and Convex and the mirror door tracks that work with them. In this video I’ll be using the 23-225 and 23-041 roller assemblies with convex wheels and the 23-040 sliding mirror bottom track. I will also be using the 23-028 roller assembly with a Concave wheel and the 23-256, 23-257 and the 23-258 mirror door tracks. Keep in mind the

Read more